FUNCTIONAL PRINCIPLE The water treatment unit ensures consistently high water quality by removing iron, manganese, and hardness in a single pass, raising the pH value, and significantly reducing ammonium. No chemicals, additives, or additional technical equipment are required – only standard regeneration salt is needed. With each regeneration cycle, the entire system is automatically cleaned and disinfected. Thanks to the use of zeolite crystals, hardly any other water treatment system achieves such a high level of treatment performance in a single pass. Unlike conventional resins, the crystals provide better filtration and can be fully cleaned much faster by backwashing without product loss. Proper use ensures a service life of up to 10 years for the filter material. DIMENSIONS WR 1–42 WR 1–75 WR 1–122 WR 1–167 WR 1–214 • A 1325 1590 1590 1870 1870 • B 260 260 330 370 400 • C 460 460 460 460 460 • D 835 835 835 1015 1015 All values (mm) TECHNICAL DATA WR 1–42 WR 1–75 WR 1–122 WR 1–167 WR 1–214 • Contents (litres) 28.3 42.5 70.8 99 127 • Tank type Q 10.44 Q 10.54 Q 13.54 Q 14.65 Q 16.65 • Capacity (m3 x dH) 42 75 122 167 214 • Salt per regeneration (kg) 4 5.2 7.5 10 14 • Max. Iron (mg/l) 8 10 15 15 15 • Min. pH value before neutralisation 6 6 6 6 6 • Max. flow rate (m3/h)* 2.5 2.5 4 5 5.5 • Nominal flow rate (m3/h)* 1.5 1.5 2 2.5 3 • Backwash flow rate (m3/h)* 0.9 1 1.7 2 2.5 • Minimum/maximum water pressure (bar) 1.8/7 1.8/7 1.8/7 1.8/7 1.8/7 • Minimum/maximum water temperature (°C) 5/37 5/37 5/37 5/37 5/37 • Electrical connection (V/Hz) 230/50 230/50 230/50 230/50 230/50 • Length of power connection cable (m) 4.5 4.5 4.5 4.5 4.5 • Connections (inch) 1 1 1 1 1 • Brine tank capacity (litres) 100 100 100 200 200 *The listed flow rates and capacities may vary depending on the composition of the water. Attention: When using these systems, the raw water must not be aerated! D A B C 61
RkJQdWJsaXNoZXIy MTkyODMyNw==