63 BOREHOLE PUMPS Well heads in PP for plastic pipes CODE Ø Well pipe [mm] Ø Connection [mm] B1.09.121 110 32 B1.09.122 125 32 B1.09.123 125 40 B1.09.124 160 40 B1.09.125 160 63 INCLUDED: APPLICATIONS The well head is used for well sealing with a casing diameter of 107-162 mm with a pump installed within it, with a 32 - 63 mm polyethylene standpipe and round section sheathed cable. • Well protection from surface ground water and foreign objects • Significant yield increase for shallow sand wells due to rarefaction • Reduced opportunity of material and equipment being stolen from the well • Increased reliability of pump suspension and simplified manhole operation The head is made of polypropylene and designed for suspending loads of up to 200 kg. ADVANTAGES no welding required - mounting is carried out by tightening the bolts fixing the sealing rubber gasket between the cover and the clamping flange pump immersion can be done with a hoist, crane, or other lifting device using the top eye bolts in the head cover fixing the wire connected to the pump using a shackle suspended on the bottom eye bolt
RkJQdWJsaXNoZXIy MTkyODMyNw==