250 FILTRATION Self cleaning filter - AP PRO and AP PRO PLUS Innovative protection filter to remove suspended particles, sand and metal particles. The water enters the filter and flows down to the cartridge from inside to outside. By simply turning the knob counter-clockwise high speed-wash with water is activated. The Venturi principle enables the dirty water to be expelled through the drain valve. To finish the cartridge cleaning operation turn the knob clockwise. There is no interruption of filtered water supply during the cartridge-washing operation. TECHNICAL FEATURES Head DELRIN with brass flange Bowl Transparent O-ring NBR Cartridge RLA-AP (included) Micron 89 μ Max Working pressure 10 bar max Min Working Pressure 1,5 bar max Burst Pressure 40 bar max Min Working Temperature 5° C Max Working Temperature 40° C Series: A AP PRO Code Inlet/Outlet Recommended Flow-Rate Max Flow-Rate Quantity m3/h Δp=0,2 bar m3/h Δp=0,5 bar A AP PRO 012 M 1/2" 3 4,6 6 A AP PRO 034 M 3/4" 3,5 5,1 A AP PRO 1 M 1" 4 5,9 A AP PRO PLUS 1 14 M 1" 1/4 5 7,4 A AP PRO PLUS 112 M 1" 1/2 6 8,9 CLEANING PROCEDURE Turn 5 times the knob counterclockwise (A). The rotation activates the aspiration of the particles retained by the cartridge net and, at the same time, opens the drain. Turn 5 times the knob clockwise, till the discharge valve is completely closed (B). ADVANTAGES It is possible to put a manometer both at the inlet and outlet of the filter. Inlet-outlet brass connection plate, can be turned 360°. Series: A AP PRO PLUS
RkJQdWJsaXNoZXIy MTkyODMyNw==